SR1-TLM-200 Door Status Indicator
"Traffic Light" Door Status Indicator
The SR1-TLM-200 Door Status Indicator provides a "traffic light" style indication using large green and red LEDs.
Features a brushed satin front panel designed to fit a UK single-gang electrical back-box.
LED control is via three control wires - green (common), yellow (red LED) and blue (green LED). By connecting the corresponding LED control line to the green conductor the LED will then illuminate. Both LEDs can be illuminated simultaneously if required by connecting both LED control lines to the green conductor.
A jumper link P1 on the internal circuit board can be used to enable a flashing mode. The flash-rate of the LEDs will be approximately 85 flashes per minute when enabled.
Power Requirement: 12 - 24 VDC
Current Draw: 40mA at 12 VDC, 70mA at 24 VDC
Dimensions: 85.5mm x 85.5mm (L x W)