Smart R Distribution Ltd - Smart Products for Smart Buildings

Help Centre: UK: 0843 289 2175 Intl: +44 1440 704 387

This website uses cookies. By continuing to use this website you are giving consent to cookies being used. For more information please click on the fortune cookie to view our Privacy Policy.

Smart R Security Products

Modules & Relays

Even the best access control or door entry systems sometimes need a module to provide that extra level of sophistication needed within the system.

Our interface modules below can be easily interfaced with most systems and help you solve those sometimes mind-boggling system configuration issues! If you can't see a solution here then do call us and let us know as we may still be able to help you - we have many years of experience in access control!

SR1-AES-TRM Timer Relay Module

Timer Relay Module

This Timer Relay Module is ideal for extending the exit or entry unlock period of a door entry or access control system with just a momentary contact output (closed contact).

The module will drive a maglock directly from the 12VDC power applied to it and, with the momentary contact output from the system, will provide a defined unlock period from 1 to approximately 25 seconds.

The timer operation is easily adjusted using the on-board potentiometer.

12 VDC operation. Please note that the unlock input can only be operated by a voltage-free switch contact.


	Timer Module Technical Datasheet

Item	Qty To Buy	List Price

SR1-AES-TRM Timer Relay Module		£13.50

SRX-TIM-4HR Timer Relay Module

Timer Relay Module - adjustable from 30 Minutes to 4 Hours

This Timer Relay Module is ideal for extending a timed switch-contact output up to 4 hours with just a momentary SPST contact input (closed contact). The module provides a SPDT (Normally Open - Common - Normally Closed) relay contact output for integration within an existing system. The timer operation is easily adjusted from 30 minutes to 4 hours using the on-board potentiometer.

12 VDC operation. Please note that the trigger input can only be operated by a voltage-free switch contact. Installation within an enclosure is made via 2 self-adhesive PCB supports (included).


	Timer Module Technical Datasheet (available soon)

Specifications:

Power Requirement: 12 VDC at 15mA - 60mA
Minimum Time Period: 30 minutes
Maximum Time Pperiod: 4 hours
Output Relay: SPDT contacts rated at 5A
Dimensions: 76mm x 43mm x 30mm
Weight: 56g

Item	Qty To Buy	List Price

SRX-TIM-4HR Timer Relay Module 0.5 - 4 hrs		£35.44

SR1-RLY-DPCO Changeover Relay Module

DPCO Relay Module

The DPCO Relay Module is a voltage-operated double-pole change-over relay intended for access control system interfacing. Operation voltage can be either DC or AC.

Without power the relay contacts remain in the Normally Closed position. When power is applied to the input the relay contacts change over to Normally Open.

Installation is intended within existing access control panels / enclosures. Fixing is achieved by a sticky pad (supplied).

Power Requirement: 8- 30 VAC or 11- 30 VDC
Current Draw: 45mA at 12 VDC
Relay contacts: Double-Pole Changeover (DPCO)
Relay Contact Rating: 5A at 24 VDC / 240 VAC

Item	Qty To Buy	List Price

SR1-RLY-DPCO Changeover Relay Module		£14.00

SR1-TLM-100 Door Status Indicator

"Traffic Light" Door Status Indicator

The SR1-TLM-100 Door Status Indicator provides a "traffic light" style indication using large green and red LEDs.

Features a brushed satin front panel with a black plastic back-box for surface mounting.

LED control is via three control wires - green (common), yellow (red LED) and blue (green LED). By connecting the corresponding LED control line to the green conductor the LED will then illuminate. Both LEDs can be illuminated simultaneously if required by connecting both LED control lines to the green conductor.

A jumper link P1 on the internal circuit board can be used to enable a flashing mode. The flash-rate of the LEDs will be approximately 85 flashes per minute when enabled.

Power Requirement: 12 - 24 VDC
Current Draw: 40mA at 12 VDC, 70mA at 24 VDC
Dimensions: 43mm x 34mm x 115mm (L x W x D)

Item	Qty To Buy	List Price

SR1-TLM-100 Door Status Indicator		£25.00

SR1-TLM-200 Door Status Indicator

"Traffic Light" Door Status Indicator

The SR1-TLM-200 Door Status Indicator provides a "traffic light" style indication using large green and red LEDs.

Features a brushed satin front panel designed to fit a UK single-gang electrical back-box.

A jumper link P1 on the internal circuit board can be used to enable a flashing mode. The flash-rate of the LEDs will be approximately 85 flashes per minute when enabled.

Power Requirement: 12 - 24 VDC
Current Draw: 40mA at 12 VDC, 70mA at 24 VDC
Dimensions: 85.5mm x 85.5mm (L x W)

Item	Qty To Buy	List Price

SR1-TLM-200 Door Status Indicator		£42.00

SR1-PTL-150 Door Status Indicator

"Traffic Light" Door Status Indicator

The SR1-PTL-150 Door Status Indicator provides a "traffic light" style indication using large green and red LEDs in a white plastic single-gang configuration to match common electrical fittings.

The indicator can be surface-mounted using the supplied 19mm-deep white-plastic surface box or can be flush-mounted onto a standard UK single-gang box.

Power (12VDC - 24VDC) is applied to the two red wires.

A jumper link P1 on the internal circuit board can be used to enable a flashing mode. The flash-rate of the LEDs will be approximately 85 flashes per minute when enabled.

Power Requirement: 12 - 24 VDC
Current Draw: 40mA at 12 VDC, 70mA at 24 VDC
Dimensions:
- Single-Gang surface Box: 88mm x 88m
- Indicator Unit: 86mm x 86mm

Item	Qty To Buy	List Price

SR1-PTL-150 Door Status Indicator		£33.00

SR1-ILM-2D 2-Door Interlock Module

Interlock module (2-Door) to prevent a door from being opened into an area when the other door is opened
Ideal for clean-rooms and cash offices
Nominal power requirement: 12 VDC
Relay contact rating: 3A @ 125 VAC
Case size: 73mm x 63mm (L x W)

Item	Qty To Buy	List Price

SR1-ILM-2D 2-Door Interlock Module		£51.23

Latest Smart R News

13-05-2013 - Smart R announced as distributor for Vanderbilt Industries at IFSEC 2013
UK based Smart R Distribution appointed as European distributor for Vanderbilt Industries access control and video management systems.

22-01-2013 - There's snow way of stopping the Smart R Team!
8 inches of snow in Haverhill, Suffolk and the Smart R team have all made it to work on time and in one piece.

02-01-2013 - HAPPY NEW YEAR from the Smart R Team!
The Smart R Team would like to wish all their customers, followers and friends a happy, healthy and prosperous New Year.

News Archive

Smart R Info Pages

Smart R Newsletter Signup
Keep up to date with our latest Products, News &
Support by signing up to our regular Newsletter

Web Design by Pure Energy Multimedia