|
SR1-SHR-2700 Series of monitored Shear maglocks
Intended application: For concealed flush installation
Shear maglocks operate by seating two conical locking bolts located on opposite corners of the armature plate into matching keep-holes on each end of the electromagnet body.
The SR1-SHR-2700 series is available in two models, SR1-SHR-270030 and the SR1-SHR-270035.
Hall effect lock monitoring is featured with a switch-contact output (SPDT rated 3.0A @ 12V DC) to indicate the maglock status.
- Voltage: 12 - 28 VDC self-regulating
-
Voltage tolerance: ±10%
-
Current (at temperature 20°C):
-
SR1-SHR-122630:
Pull in: 1.7A, Holding: 0.5A @ 12 VDC
Pull in: 1.1A, Holding: 0.32A @ 24 VDC
-
SR1-SHR-122635:
Pull in: 1.9A, Holding: 0.55A @ 12 VDC
Pull in: 1.2A, Holding: 0.35A @ 24 VDC
-
Operating Temperature: -10°C to 55°C (14 to 131°F)
-
Humidity: 0% to 95% non-condensing
-
Typical surface temperature when powered: current temperature plus 20°C
-
Shearing Force: Up to 1226 Kg (2700 lbs) in shear
-
Gap between maglock and armature plate is 3mm maximum
-
Locking time delay: 1 - 6 seconds (adjustable)
-
Hall effect monitor output (SPDT rated 1.0A @ 12V DC), remotely monitors the door lock or unlock status. NC Output = door open, NO Output = door closed
-
Approximate nominal weight:
SR1-SHR-270030: 1.8 Kg
SR1-SHR-270035: 2.2 Kg
|
|
SR1-SHR-2700 Series Technical Datasheet No. 45 |
|
|
