HID iCLASS SE RK40, RPK40 MultiCLASS and RWK400 Reader/Writer with Keypad
The iCLASS Keypad readers are compatible with any access control system using the SIA Wiegand interface. Both keypad and card data are transmitted via the Wiegand outputs. The RWK400 can also be connected to a PC or microcontroller for read/write operation using the reader serial port, which provides either an RS-232 or RS-485 interface.
The iCLASS Keypad Reader is also capable of local PIN verification at the reader, when the PIN code is programmed into the iCLASS card at the factory or in the field, using the iCLASS Card Programmer. This allows Card + PIN code to be used with panels without PIN capability, or with panels which only provide 2 of 7or 3x4 matrix keypad inputs.
Keypad Output
A variety of keypad outputs are available. Options include outputs of 4-bit, 8-bit (Dorado), 4-bit with parity, 26-bit output, 4-keys with parity and local pin verify.
-
Output: Available in both Wiegand and Clock & Data output
-
Colour: Available in black or grey
-
Termination: Available with 457mm (18") pigtail or terminal-strip
-
Dimensions: 85mm x 122mm x 28mm (3.3" x 4.8" x 1.1")
-
5-16 VDC operating voltage (linear power supply recommended)
-
Enclosure rating: IP55
Read/Write Option The model RWK400 is the read/write version of the read-only model RK40. FeliCa Compatibility The model RPK40-Tsmart is also available as a FeliCa-compatible reader for mass transit applications.
Multi-Technology Option - RPK40 Prox and iCLASS™ Keypad Reader The RPK40 is a multi-technology card reader which can read both HID Prox and iCLASS cards and was designed for customers transitioning their current card system from HID Prox to iCLASS® credentials. With the RPK40 reader, the customer has the ability to transition to smart cards over time while incorporating the use of multiple card technologies within a single building or across multiple facilities.
iCLASS SE Versions For use in NFC applications or where an SIO enabled credential is to be used for secure identification.
Read/Write Version Discontinued
Please note that the RWK400 version (HID p/n 6131xxxxx) has been discontinued by HID and is therefore no longer available. For further information please call us on 01440 704 387.
|