SR1-REX-WPB025 Push-Button suitable for architrave fitting - wireless operation
SR1-REX-WPB025 Push-Button with wireless operation - suitable for architrave fitting
Wireless push-buttons allow the "Request To Exit" or "Door Open" functions to be controlled remotely in a location away from the door - and with no cabling!
Applications include DSE access & egress through powered or access-controlled doors.
Manufactured in stainless steel with a brushed finish the unit features a raised push-button and "Press To Exit" legend.
Push-Button Unit
-
Power Requirement: 12V battery
-
Battery Life: Maximum of 13,000 operations
-
Transmitting frequency: 433 MHz
-
LED battery strength indication
-
Nominal Dimensions: 115mm x 42mm x 40mm (L x W x D)
-
Transmitting range: Up to 10 Metres depending on site conditions
RF Code-Hopping Receiver / Controller
- Power Requirement: 12 to 24VDC
-
Output: Dry Relay SPDT Contact - 3A/120VAC 3A/24VDC Rated
-
Relay strike time: 1, 3, 5 or 10 seconds
-
Buzzer alarm indicates battery voltage is lower than 9.2 VDC
-
LED indicators: Green: Power, Red: Receive & Output
- Nominal Dimensions: 83mm x 62mm x 30mm (L x W x D)
|